Bộ nguồn 5V, 2A, 10W tương thích với các dòng điện thoại:

» Digium D40
» Digium D50
» Digium D70

The 2m 50-pin telephone cable interfaces the TDM2400P card with regular RJ-11 two-conductor telephone cables and is used in combination with either the 24-port, 2-wire breakout box (ACC2400PBO) or the 24-port, 2-wire 19″ rack mount unit (ACC2400PPP). The cable has one male end for interfacing with the TDM2400P and one female end for interfacing with other 50-pin equipment. Note: Patch panel and TDM2400P sold separately.

View Demo | Specifications | How to buy

Used in conjunction with Asterisk®, the TE121P can be used to deliver a wide range of PBX and IVR services to the network or handset including Voicemail, Call Conferencing, Three-way Calling, and VoIP Gateways.

The Wildcard TE121P is a single span, selectable T1 (24-channel), E1 (32-channel), or J1 (24-channel) card. The card utilizes Digium’s VoiceBus™ technology. VoiceBus technology allows the TE121P to use an industry standard bus-mastering PCI interface, as found in millions of PCs worldwide, to maximize system compatibility and eliminate system conflicts.

The TE121P supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice, routed directly to the Asterisk Open Source PBX, and 12 to data, handled by the underlying Linux operating system, thus eliminating the need for an external router. The TE120P works in both 3V and 5V slots by auto detecting the slot’s voltage

By utilizing our TDMoE (TDM over Ethernet) technology, an exclusive Digium process, you can easily connect multiple PCs equipped with the TE120P and achieve voice quality on par with single PBX implementations. Scalability for this product is derived from adding multiple TE120Ps to each individual PC. Add additional cards as you need them for your expanding applications.

The TE121P supports industry standard telephony and data protocols, including both RBS and Primary Rate ISDN (PRI) protocol families for voice and PPP, Cisco HDLC, and Frame Relay data modes. The board drives both line-side and trunk-side interfaces, including call features.

Using this card in concert with Digium’s Asterisk® software, standard PC hardware, and the Linux® OS, you can upgrade your PBX to a sophisticated telephony environment capable of supporting both voice and data channels.

• Manual
• Datasheet
• Specifications
• Installation Guides
• QuickStart Guides

(Image shown with echo cancellation module)

View Demo | Specifications | How to buy

(Image shown with echo cancellation module)

View Demo | Specifications | How to buy

The TE207P is a bundling of our leading TE205P product and our new VPMOCT064 Octasic DSP-based echo cancellation module. The TE207P is Digium’s and the industry’s first two-port digital card featuring hardware-based echo cancellation. The new module enables users to eliminate echo tails up to 128ms or 1024 taps across all 64 channels in E1 mode or 48 channels in T1/J1 modes. Further, this module takes advantage of the Octasic Voice Quality Enhancement to provide superior sound quality on all calls.

Digium has designed the TE207P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE207P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features. The TE207P is for use only with a 5.0 volt PCI slot.

View Demo | Specifications | How to buy

The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1/J1 channel banks to connect with E1 circuits. Because the TE210P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE210P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE210P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE210P supports a 3.3v PCI slot only – typically available on newer server motherboards and in 64-bit PCI bus architectures.

View Demo | Specifications | How to buy

The TE212P is a bundling of our leading TE210P product and our new VPMOCT064 Octasic DSP-based echo cancellation module. The TE212P is Digium’s and the industry’s first two-port digital card featuring hardware-based echo cancellation. The new module enables users to eliminate echo tails up to 128ms or 1024 taps across all 64 channels in E1 mode or 48 channels in T1/J1 modes. Further, this module takes advantage of the Octasic Voice Quality Enhancement to provide superior sound quality on all calls.

Digium has designed the TE212P to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE212P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE212P supports a 3.3v PCI slot only – typically available on newer motherboards and in 64-bit PCI bus architectures.

Certifications for the TE212P are pending.

View Demo | Specifications | How to buy

Digium’s TE220BF PCI Express card provides termination of up to 60 channels of voice or data across two E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE220 allows E1 and T1 circuits to be mixed with full channel synchronization. Supporting PCIe x1, the TE220 may be used in any available PCIe 1.0 compliant slot – 1x, x4, x8, and x16 without considerations for voltage selection or lane size.

The TE220 may be combined with Digium’s VPMOCT064 Octasic DSP-based echo cancellation module (not shown in picture). The VPMOCT064 provides the G.168 algorithm which has been labeled a benchmark for echo cancellation and performs 128ms (1024 taps) of echo cancellation across all 60 channels in E1 mode or all 48 channels in T1/J1 modes. Bundled with the VPMOCT064, the product SKU is TE220B.

Digium has designed the TE220 to be fully compatible and integrated with Asterisk Business Edition, AsteriskNOW, and open source Asterisk.

The TE220 supports industry standard telephony protocols including North American and European Primary Rate signalling as well as standard Robbed Bit, Channel Associated Signalling in addition to standard PPP, HDLC, and Frame Relay data modes.

Currently available through Digium Distributors and Resellers.

View Demo | Specifications | How to buy