Wireless LAN:

• Complies with 802.11g and 802.11b (2.4GHz) Standards Data Rates up to 54Mbps • Support WEP, WPA data encryption to secure wireless connection • Support WPS PBC via Power ON • Both Support Wireless Access Point Mode and Wireless Client Mode • Modulation Technique: - 802.11b： DSSS (Direct Sequence Spread Spectrum) with BPSK (1Mbps), QPSK (2Mbps), and CCK (5.5 and 11Mbps) - 802.11g： OFDM Transfer data rate: 802.11g : 54, 48,36,24, 18,12,9,6Mbps, auto-fallback 802.11b: 11, 5.5, 2,1Mbps, auto-fallback Output Power : 15~18dBm(CCK), 10~13dBm(OFDM) RF sensitivity : @PER<0.08 ,11Mbps < -84dBm(typical ) @ PER<0.08, 54Mbps < -70dBm(typical)

Telephony Specification:

• Voice Codec: iLBC (internet Low Bitrate Codec),G.711(A-law/μ-law), G.729 AB, • G.723 (6.3 Kbps / 5.3Kbps), G.276 (16, 24, 32, 40 Kbps) • FAX support : T.38 FAX Relay,G.711 Fax pass-through • SIP Session Timer Support • P-Asserted-Identity header Support (Optional) • Call Waiting • Call Hold/Resume • Call Transfer: Blind Transfer / Attended Transfer • Call Forward: On Busy Forward / No Condition forward / No Answer Forward • Call Screen: Incoming Call Screen (Reject or Forward Incoming Call) / Outgoing Call Screen (Blocking Outgoing Call) • Multi-Line Appearance • MWI • DTMF Relay : In-band DTMF Relay / Out-of-band DTMF Relay (RFC2833) • 3-Way Conference • Peer-to-Peer SIP Call by Dial Plan

	IP Specifications:
	• SIP (RFC 3261) , SDP (RFC 2327), Symmetric RTP, STUN (RFC3489), ENUM (RFC 2916), RTP Payload for DTMF Digits (RFC2833), Outbound Proxy Support • LAN :NAT, DHCP Server • WAN: PPPoE client, DHCP client, Fix IP Address • Network Address Translation: Providing build-in NAT router function. • Static Routing • Virtual Server • QoS : IP TOS (IP Precedence) / DiffServ • Peer to Peer Call by Dial Plan

	Call Features
	• Adjustable volume : - 9 db ~ 9 db • VAD (Voice Activity Detection) • Dynamic Jitter Buffer • CNG (Comfort Noise Generation) • Lost Packet Concealment • Caller ID Generation: DTMF CID / Bellcore CID / ETSI CID / NTT CID Generation

	Firewall Security
	• Stateful Packet Inspection • DoS attack defection • Access Control Service • Content Filtering • IP & Generic Packet Filtering • Real-time Attack Alert and Logs • DMZ Interface for Public Server

	Configuration & Management
	• Web-based Graphical User Interface • Remote management over the IP Network • Web-based firmware upgrade • Backup and Restore Configuration file • Auto Provision by TFTP/FTP/HTTP/HTTPS (Optional) • SNMP v1/v2

	General Specification
	• AC power : AC100V-240V, DC12V/1.5A,50/60 Hz • Temperature: 0°C ~ 40°C (Operation) • Humidity: up to 90% non-condensing • Antenna : Reverse connector (RP-SMA) with a detachable • Emission: FCC Part 15 Class B, CE Mark • Dimension : 170 x 100 x 35 mm • Weight: 200g

FAQ

Q.How many clients can register with it at a given time? A. 10 wireless users maximum. Q.What is the minimum and maximum range of space? A. WATA supports a range of up to 150 feet (46 m) indoors and 300 feet (92 m) outdoors. However, such brick walls and metal frames or siding greatly can reduce the range of a Wi-Fi LAN by 25% or more. Q. Can it cover in feets? (vertical signal) A. That will be yes. the antenna is designed for flat place,but vertical signal is also supprted.. it's around 3 meters in feets and the singal drops dramatically. Q.Can this range be increased? A. Replace the Wireless Router WiFi Antenna, Greater WiFi range can also be achieved with a high gain directional antenna. WATA support maximum up to 10 dbi antenna.